Enthermics 4-Blanket Warming Cabinet: DC150
Enthermics 4-Blanket Warming Cabinet: DC150
product ID
VM-ENTMSDC150
Product Description:
Enthermics DC150 4-Blanket Warming Cabinet: The countertop DC150 blanket warmers are quiet with no moving parts, which makes the unit great for labor and delivery rooms, ICU, and NICU. The patient-friendly design allows you to put these aesthetically pleasing units right where needed, allowing nurses and aides to maximize their time.
Additional DC150 Features: Staff can place more emphasis on comfort and care with the relaxing, blue lights inside the warmers that soften the patient’s room. The Designer Series blanket warmers quickly and efficiently heat blankets to precise temperatures using WarmSafe™ zone heating technology. The heated shelves ensure every blanket is safely and evenly warmed by adjusting the temperature throughout the cabinet. Our fan-less technology is designed to provide quiet warmth for patients, allowing them to get the rest they need for recovery. And, without lint-clogged fans, these units are safe and easy to maintain. Shown with Optional Timer, not included. See tabs for more information.
Have questions about Medical Warming Cabinets? Visit Medical Warming Cabinets in our Knowledge Center to learn all about them.
To view additional Blanket & Solution Warming Cabinets, click the following link to browse Venture Medical’s Complete Catalog of New & Completely Refurbished Blanket & Solution Warming Cabinets.
- LED interior lighting casts a comforting blue glow with two (2) different intensity settings and off mode
- In the event of a power failure, the cabinet will remember its programming and begin to operate as before when power is restored
- A warming shut-off system, separate from the electronic control, prevents overheating
- The access point and the plug has been added to the back panel to allow the appliance owner to add their data logger or temperature management hardware
- Single-chamber warming cabinet
- White epoxy-coated steel exterior casing and interior insert
- Glass Door: Single pane, energy-efficient, e-coated glass window in the door allows for inventory observation and reflects heat into the cavity
- Convenient: The hands-free, push-button door is designed to make loading easier when carrying an armful of blankets
- The door has a full gasket and is hinged on the right side of the unit
- WarmRight® incorporates a multiple zone warming technology that heats where and when it is needed
- All chamber surface temperatures are monitored, providing an efficient balance of heat, low energy consumption, and minimal heat loss
Mix and Match: Pair with a Designer Series fluid warming cabinet to complete your patient warming system
- Furnished with four (4) 3/4″ (19 mm) non-skid rubber feet
- Mobile: Optional casters or mobile cart available, sold separately
General Specifications:
- Chamber: Single-chamber warming cabinet
- Lighting: LED
- Capacity: 3-4 blankets
- Dimensions: 16.9 in H x 18.5 in W x 21.8 in D
- Interior Size: 1.5 ft3
- Interior/Exterior: White epoxy-coated steel exterior casing and interior insert
- Window: Single pane, energy-efficient, e-coated glass reflects heat into the cavity
- Door Release: Push-button door release
- Door: Full gasket and hinged on the right side of the unit
- Warming Zones: Multiple zone warming technology
- Temperature Monitoring: All chamber surface temperatures are monitored
- Furnished with four (4) 3/4″ non-skid rubber feet
Transport and storage environmental Conditions (not to exceed 15 days):
- Ambient temperature range of -40° to +70°C
- Relative humidity range of 10% to 95%, non-condensation
- Atmospheric pressure range of 50KPa to 106KPa
Operational environmental Conditions:
- The unit must acclimate to room temperature where it will be placed. 24 hours is recommended
- Recommended environmental temperature range is 15°C to 32°C (60°F to 90°F)
- The recommended relative humidity is above 20%, non-condensation
Control:
- Adjustable temperature range of 37 – 82°C (98 – 180°F)
- Operates in Celsius or Fahrenheit
- Four-digit LED display
- On/Off key
- Up and down arrow keys
- Actual temperature key
- Interior light key
- Built-in speaker for audible feedback
- Built-in control button lock-out feature
Enthermics Designer Series Warming Cabinet Brochure (click to view)
Available Options are Sold Separately, and all options must be specified at the time of order.
Cart:
- Cart Dimensions – 34-1/2″ H x 24″ W x 26″ D: 5018614
Door Assembly:
- Blue epoxy coated without manual door lock (standard)
- Blue epoxy coated with manual door lock (optional)
- Stainless Steel without manual door lock (optional)
- Stainless Steel with manual door lock (optional)
Seismic Mounting Brackets:
- Special installation requirements apply; overall width increases 2″: 1014403
Timer Control:
- An optional timer allows the user to program the warmer to automatically turn on and off at a selected time (Available with original order only)
